[SN 21630083] USED Gibson Montana Gibson / 1960s J-45 Original Ebony [20]

1960s J-45 Original from the Original Collection. It has an adjustable saddle, and the Gibson scale mahogany neck has a slightly thinner round profile than the 50s Original, with a narrower nut width of 42.8mm. The pegs are triple Cruson type, and the pickups are not mounted. * After our arrival, it has been cleaned, string replaced, rod adjusted, string height adjusted, and rubbed together, so it is in good playing condition. There is a paint crack next to the peg on the 6th string side of the head due to wood shrinkage. There is a ding on the neck from the 1st floor to the 3rd floor with stand burns and paint dings, and there are several small dings with dings all over the top of the body. There is a small ding on the side end of the body with paint chips, and overall, there are some minor scratches and small dings. The synthetic leather of the handle of the case attached is peeling off. Item rank: B (Good) Year of manufacture: Made in 2020 Truss rod: There is enough room. Fret: 60-70%. Accessories Hard case / Genuine Country of Origin USA Weight 1.82kg Serial 21630083 Truss Rod: No problem, confirmed up to 60 degrees on both sides of the rod. Fretboard: No problem, enough fretboard height. String height(bass string side)|2.5mm above 12th fret String height(treble string side)|2.0mm above 12th fret Nut width|42.5mm Neck thickness(near 1st fret)|21.2mm Neck thickness(near 12th fret)|- Scale|628mm (24.75″) RADIUS|305mm (12″) Strings used for setup|D’Addario EJ-16 / .012-.053 set Repair and maintenance parts|Cleaning, string replacement, rod adjustment, string height adjustment, and rubbing * The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center. * This item is only available as a single item. We will try to delete the product information as soon as possible, but it is not always in real time. specs Truss Rod No problem, rod is confirmed to be 60 degrees to the left and right. Remaining frets No problem, there is enough fret height. String height (bass string side) 2.5mm above 12th fret String height (treble string side) 2.0mm above 12th fret Nut Width 42.5mm Neck Thickness (near 1st fret) 21.2mm Neck Thickness (near 12th fret) -Neck Thickness (near 12th fret) Scale 628mm (24.75″) RADIUS 305mm (12″) Strings for setup D’Addario EJ-16 / .012-.053 set Repair and maintenance Cleaning, string replacement, rod adjustment, string height adjustment, and alignment